-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Suspended solids (sludge concentration) sensor
Infrared scattering light technology
The suspended solids (sludge concentration) analyzer is based on infrared scattered light technology, that is, the infrared light emitted by the light source will be scattered when it passes through the tested sample during the transmission process, and the scattered light intensity is proportional to the suspended solids concentration.
The suspended matter (sludge concentration) sensor is provided with a scattered light receiver in the 90° or 180° direction, and the suspended matter concentration value is obtained by analyzing the intensity of the scattered light.
This product is widely used in the monitoring of suspended solids/sludge concentration in sewage plants, water plants, water stations, surface water, aquaculture, industry and other fields.
Sample Now
The suspended matter (sludge concentration) sensor is provided with a scattered light receiver in the 90° or 180° direction, and the suspended matter concentration value is obtained by analyzing the intensity of the scattered light.
This product is widely used in the monitoring of suspended solids/sludge concentration in sewage plants, water plants, water stations, surface water, aquaculture, industry and other fields.
Product Features
| Categories of models | ||||
| The specific models | Network | Referred to as" | Terminal type (interface) | Size |
| KRCFB-L | ||||
Technical Parameter
| Project | Within the capacity |
| Range | 0-200mg/ L (lower limit of measurement 1mg/L) |
| 0-5000mg/ L (lower limit of measurement 2mg/L) | |
| 0-50000mg/ L (lower limit of measurement 20mg/L) | |
| precision | Less than ±10% of the measured value (depending on the homogeneity of the sludge) or 10mg/L, whichever is greater |
| The resolution of the | 0.001mg/l, 0.01mg/l, 0.1mg/l, 1mg/l, depending on the range |
| The power supply | |
| Project | Within the capacity |
| Sensor supply voltage | 9~36VDC |
| Physical properties | |
| Project | Within the capacity |
| Protection grade | P68/NEMA6P |
| The length of the cable | Standard 10-meter cable, can be extended to 100 meters |
| Other parameters | |
| Project | Within the capacity |
| The output | MODBUS RS - 485 output |
| Storage temperature | 15 ℃ to 50 ℃ |
| Working temperature | 0 ℃ ~ 45 ℃ |
| Pressure range | 0.3 MPa |
| The calibration | Calibration of standard liquid and water sample |
| The response time | 6 seconds < T90 < 300 seconds (adjustable Settings) |
Product Size
Product Size drawing (unit: mm)
Selection Guide
| Product model | |
| Spectrum | 26GHz |
| The theory of bandwidth | |
| Transmission power | |
| Reception sensitivity | 1s |