-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Ammonia nitrogen sensor
Low power consumptionEasy to installlow maintenance cost
A basic conventional water quality monitoring digital ammonia nitrogen sensor; it is made of industrial online electrode and ammonium ion selective electrode of PVC membrane, which can selectively test the ammonium ion content in water, with fast response speed and accurate measurement. The built-in temperature sensor can automatically compensate the temperature, which is suitable for online long-term monitoring environment.
Sample Now
Product Features
| Categories of models | ||||
| The specific models | Network | Referred to as" | Terminal type (interface) | Size |
| KRCFB-L | ||||
| Features: 1. Digital sensor, direct output OF RS-485 digital signal, MODBUS/RTU support 2. Built-in temperature sensor, automatic temperature compensation 3. Innovative ammonium ion membrane head is replaceable, with low maintenance cost 4.3/4 "NPT upper and lower mounting thread design for easy installation 5. Low power consumption of sensor, anti-interference design of internal circuit 6. Optional addition: pH and potassium ion compensation, reduce interference test Note: pH and potassium ion compensation are selected according to pH of medium and ion interference | ||||
Technical Parameter
| The measured parameters | |
| Project | Within the capacity |
| The output signal | Support RS-485,MODBUS/RTU protocol |
| Method of measurement | Coated ion selection method |
| Range | 0 ~ 100.0mg/L (pH range 4~10) |
| Precision | ±5%F.S. or ±3mg/L, whichever is greater |
| The resolution of the | 0.1mg/L |
| The power supply | |
| Project | Within the capacity |
| The power supply | 12 or 24VDC±10%, 10mA; |
| Physical properties | |
| Project | Within the capacity |
| Protection grade | IP68; Water depth 20 meters; |
| The service life of the | Sensor 1 years or more; Membrane head for 6 months |
| The length of the cable | 5 meters (default), customizable |
| Sensor housing material | PVC; Can be customized |
| Other parameters | |
| Project | Within the let |
| The working conditions | 0 ~ 40 ℃; < 0.2 MPa; |
| Calibration mode | Two calibration |
| The response time | 30 seconds T90 |
| Temperature compensation | Automatic temperature compensation (Pt100) |
Product Size
Product Size drawing (unit: mm)
Selection Guide
| Product model | |||||
| Spectrum | 26GHz | ||||
| The theory of bandwidth | |||||
| Transmission power | |||||
| Reception sensitivity | 1s |