-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Input level gauge
Product Features
Main technical performance
Measuring range: -0.1... 0 ~ 0.01... 100MPa
Overload: 2x full range pressure
Pressure type: gauge pressure or absolute pressure or sealed gauge pressure type
Accuracy: ±0.25%FS(typical) (diffused silicon), ±0.5%FS(maximum) (ceramic piezoresistibility), ±0.1%FS(high precision) (ceramic capacitance)
Stability: ±0.1%FS/ year (typical), ±0.2%FS/ year (Max)
Zero drift: ±0.03%FS/℃(≤100kPa), ±0.02%FS/℃(> 100kPa)
Full drift: ±0.03%FS/℃(≤100kPa), ±0.02%FS/℃(> 100kPa)
Medium temperature: -40℃ ~ 85℃ (diffusion silicon), -40 ~ 135℃ (ceramic piezoresistive, ceramic capacitance)
Storage temperature: -40℃ ~ 120℃
Power supply: 10 ~ 36VDC(recommended 24VDC. Intrinsic safety type power supply via safety gate)
Output signal: 4 ~ 20mADC, 0/1 ~ 5/10VDC (non-standard custom)
Load resistance: ≤(U-15)/0.02 ω, ≤(U-15)/0.02 ω, > 5K
Process connection: M20× 1.5 external thread; M27×2 external thread; Clamp connection (other customizable)
Shell protection: cable and connector connection are IP65
Stability: ≤0.2%FS/ year
| Product features | ||||
| Categories of models | ||||
| The specific models | network | Referred to as" | Terminal type (interface) | size |
| KRTK-100 | ||||
| Pressure (liquid level) transmitter output is divided into: standard 24VDC power supply 4 ~ 20MA output, non-standard 0 ~ 10MA / 0 ~ 5V output. Converter output for integration. The signal adopts diffused silicon (with 316 isolation diaphragm) pressure sensor, and the transmission adopts integrated circuit to amplify the pressure signal and convert it into 4 ~ 20mA / 0 ~ 10MA output current, or 0 ~ 5V voltage output. Transmitter has the following characteristics: constant current/pressure excitation, high signal amplitude up to 0 ~ 150MV, high precision, good linearity, good long-term stability, 316 steel or ceramic corrosion resistance, output signal can be transmitted far, installation, use and maintenance is very convenient. The transmitter with digital display head can display the measured value on the spot. This series of products can be widely used in process control, liquid level measurement, boiler control, environmental control, metallurgical industry, petrochemical industry, water power, medicine and food industry. | ||||
Technical Parameter
| project | Within the capacity |
| display | Header display |
| The product range | 1-300 meters |
| The resolution of the | 1mm |
| Accuracy of measurement | 5mm |
| Sampling interval | Adjustable, |
| interface | 4-20MA/RS485 |
| Communication methods | Can work 4-20mA /RS485 simultaneously |
| The record store | Continuous output |
| The power supply | |
| project | Within the capacity |
| Working current | 4-20mA |
| Working voltage | 0.5 W. |
| The power consumption of the device | |
| project | Within the capacity |
| Communicate status | |
| standby | |
| A dormant state | |
| Physical properties | |
| project | Within the capacity |
| The shell | metal |
| Overall dimensions | The total height of 150 mm |
| The weight of the | About 1 kg |
| Other parameters | |
| project | Within the capacity |
| Working temperature | - 20 ℃ ~ + 60 ℃ |
| Protection grade | IP68 |
| Relative humidity | 0 ~ 95%RH |
Product Size
Selection Guide
| Product model | |
| spectrum | 26GHz |
| The theory of bandwidth | |
| Transmission power | |
| Reception sensitivity | 1s |