-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Graphite conductivity sensor
Fast responseCorrosion resistantEasy to clean
A digital conductivity sensor for conventional water quality monitoring, using 2-electrode graphite contact design, the electrode measurement surface is a flat design, easy to clean the surface, the measurement contact surface is large, the response speed is fast, and the measurement is more accurate. The built-in temperature sensor can automatically compensate the temperature, which is suitable for online long-term monitoring environment.
Sample Now
Product Features
| Categories of models | ||||
| The specific models | Network | Referred to as" | Terminal type (interface) | Size |
| KRCFB-L | ||||
| Features: 1. Digital sensor, direct output OF RS-485 digital signal, MODBUS/RTU support 2. Built-in temperature sensor, automatic temperature compensation 3.2 Electrode graphite contact design, corrosion resistance, easy to clean 4.3/4 "NPT upper and lower mounting thread design for easy installation 5. Low power consumption of sensor, anti-interference design of internal circuit Application scope: River water quality monitoring, industrial wastewater, environmental protection water treatment, chemical process, industrial engineering and other online monitoring of the whole process. | ||||
Technical Parameter
| The measured parameters | |
| Project | Within the capacity |
| The output signal | Support RS-485,MODBUS/RTU protocol |
| Method of measurement | 2 electrode contact method |
| Range | 0 ~ 2000 mu S/cm 0 ~ 5000 mu S/cm |
| Electrode constant 1.0 | |
| Precision | Plus or minus 1.5% F.S. |
| The resolution of the | 1 mu S/cm |
| The power supply | |
| Project | Within the capacity |
| The power supply | 12 or 24VDC±10%, 10mA; |
| Physical properties | |
| Project | Within the capacity |
| Size | Diameter of 30 mm; Length is 170 mm; |
| Protection grade | IP68; Water depth 20 meters; Other custom |
| The service life of the | Sensor 3 years or above |
| The length of the cable | 5 meters (default), customizable |
| Sensor housing material | PVC; PEEK; Can be customized |
| Other parameters | |
| Project | Within the let |
| The working conditions | 0 ~ 65 ℃; < 0.6 MPa; High temperature conductivity customization |
| Calibration mode | Two calibration |
| The response time | 10 seconds T90 |
| Temperature compensation | Automatic temperature compensation (PT1000) |
Product Size
Product Size drawing (unit: mm)
Selection Guide
| Product model | |||||
| Spectrum | 26GHz | ||||
| The theory of bandwidth | |||||
| Transmission power | |||||
| Reception sensitivity | 1s |