-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Air quality (PM2.5/PM10) transmitter
Product Features
RS-PM-N01-2 Is an industrial general particle concentration transmitter, the use of laser scattering measurement principle, through the unique dual-frequency data acquisition technology for screening, obtained the number of particles with equivalent particle size per unit volume, and scientific unique algorithm to calculate the particle mass concentration of equivalent particle size per unit volume, and to485Interface byModBus-RTUProtocol for data output. It can be used for outdoor weather station, dust monitoring, library, archives, industrial workshop and so onPM2.5orPM10Concentration monitoring site.
Functional features
◇ Range: 0-1000ug/m3, resolution: 1ug/m3
◇ PM2.5 and PM10 output at the same time
◇ Unique dual-frequency data acquisition and automatic calibration technology, consistency up to ±10%
◇ Adopt advanced laser anti-attenuation technology to ensure long-term stability of equipment
◇ Standard Modbus-RTU communication protocol, easy access
Technical Parameter
Dc power supply (default) | 10~30V DC | |
Power consumption | 0.5 W. | |
Transmitter circuit operating temperature and humidity | - 20℃~ + 60℃,0%RH~95%RH The condensation | |
Communication interface | 485Communication (modbus) protocol Baud rate:2400,4800(Default),9600 Data bit length:8position Parity check mode: None Stop bit length:1position The defaultModBusMailing Address:1 Supported function code:03 | |
Parameter Settings | Use the provided configuration software to pass485Configuring interfaces | |
The resolution of the | 1ug/m3 | |
precision | Plus or minus10% (@ 500 ug/m3, 60% RH, 25℃) | |
Measuring range | PM2.5 | 0~1000ug/m3 |
PM10 | 0~1000ug/m3 | |
Response speed | Or less90S | |
Warm up time | Or less2min | |