-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Industrial EC transmitters
It can be widely used in continuous monitoring of the conductivity value of aqueous solutions such as section water quality, aquaculture, sewage treatment, environmental protection, pharmaceuticals, food and tap water.
Product Features
This product is a device for measuring the conductivity value of solution, with automatic temperature compensation function, which can compensate the current temperature conductivity to the specified temperature.
It can be widely used in continuous monitoring of the conductivity value of aqueous solutions such as section water quality, aquaculture, sewage treatment, environmental protection, pharmaceuticals, food and tap water.
■ The maximum range of conductivity measurement is 1~20000μs/cm; Temperature measurement range -20~100℃, resolution 0.1℃.
■ RS485 communication interface: MODBUS RTU communication protocol can be easily connected to the computer for monitoring and communication.
■ You can set the ModBus communication address and change the baud rate.
■ The device adopts wide voltage power supply, ranging from 7 to 30V dc.
■ The shell of the product is IP65 protection grade, which can be used in outdoor rain and snow environment.
Technical Parameter
The power supply | DC 7~30V |
Power consumption | 0.4 W. |
Communication interface | RS485; The standardMODBUS-RTUAgreement; Baud rate: default4800(2400,4800,9600Can be set) |
Conductivity measurement range | K = 1:1 ~ 2000 mu s/cm; Resolution: 0.1μs/cm K=10:10 to 20000mus/cm; Resolution:1mus/cm |
Conductivity measurement error | Plus or minus1%FS |
Temperature range | - 20 ~ 100℃; Resolution:0.1℃ |
Temperature measurement error | Plus or minus0.5℃ |
Temperature compensation range | - 20 ~ 100C (default compensation temperature25℃) |
Temperature compensation coefficient | The default0.02 |
Operating conditions of equipment | Ambient temperature:- 20-60℃ Relative humidity:< 85% |
The electrode wire length | The default5m(can be customized10m,15m,20m) |