-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Wall mounted king shell temperature and humidity transmitter
Product Features
This product is a wall-mounted high-protection-grade shell with IP65 protection grade, rain and snow protection and good air permeability. The circuit adopts industrial-grade microprocessor chips imported from the United States and imported high-precision temperature sensors to ensure excellent reliability, high precision and interchangeability of products. This product adopts particle sintered probe sheath, and the probe is directly connected to the shell and has a beautiful appearance. The output signal type is divided into RS485, which can communicate up to 2000 meters. The standard modbus protocol supports secondary development.
1.1 Product Overview
The product is wall-mounted shell with high protection grade, IP65 protection grade, rain and snow resistance and good air permeability. The circuit adopts industrial grade microprocessor chip imported from the United States and high precision temperature sensor to ensure excellent reliability, high precision and interchangeability of products. This product adopts particle sintering probe sheath, probe and shell directly connected with beautiful appearance. Output signal type is divided into RS485, up to 2000 meters of communication, standard ModBUS protocol, support secondary development.
1.2 Functions and Features
The measuring unit imported from Switzerland is used to measure accurately. Adopt special 485 circuit, communication is stable. 10~30V wide voltage range power supply, complete specifications, easy installation.
Technical Parameter
Dc power supply (default) | DC 10-30V | ||
The power consumption of the largest | 0.4 W. | ||
A quasi precision
| humidity | + / - 2% RH (60% RH, 25 ℃) | |
The temperature | Plus or minus 0.4 ℃ (25 ℃) | ||
B must precision (the default) | humidity | + / - 3% RH (60% RH, 25 ℃) | |
The temperature | Plus or minus 0.5 ℃ (25 ℃) | ||
Transmitter circuit operating temperature and humidity | - 40 ℃ ~ + 60 ℃, 0% RH to 80% RH | ||
Probe operating temperature | -40 ° C to +120 ° C Default value: -40 ° C to +80 ° C | ||
Probe operating humidity | 0%RH-100%RH | ||
Temperature display resolution | 0.1 ℃ | ||
Humidity display resolution | 0.1% RH | ||
Temperature and humidity Refresh time | 1s | ||
Long-term stability | humidity | 1% RH or less/y | |
The temperature | 0.1 ℃ / y or less | ||
The response time | humidity | 8 s or less (1 m/s wind speed) | |
The temperature | 25 s or less (1 m/s wind speed) | ||
The output signal | RS485 (Modbus protocol) | ||
installation | wall | ||