-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Beidou GNSS high precision receiver
Product Features
The Beidou GNSS high-precision receiver can realize millimeter-level high-precision positioning with local or cloud computing. It can receive and process Beidou, GPS and other satellite signals through high-precision antennas to achieve local millimeter-level terminal calculation and positioning, while supporting data return. It is transmitted to the cloud platform and combined with the Beidou ground enhancement system for joint settlement, realizing millimeter-level post-processing positioning, analyzing the displacement and deformation trend of the monitored object, and continuously giving early warning to the position status of the monitored object, realizing 24-hour all-weather unattended monitoring. It is used in slope monitoring, construction site building monitoring, bridge deformation monitoring, etc.
● Full constellation full frequency point reception
Support GPS+GLONASS+ Beidou + Galileo system;
● Fast solution
The millimeter-level positioning result can be calculated after 1 minute cold start.
● Perfect communication mode
Support all netcom 2 g / 3 g / 4 g/LORA/RS485 / RS232 / RDSS beidou short message/cable Ethernet front-end ports;
● Total factor monitoring
Support access to various sensors through wireless LoRa or wired connections;
● Provides terminal computing capability
Support local solution, local decision, no need to rely on the cloud;
● Services have no blind spots
In the communication blind area with no signal, beidou RDSS can be used for information transmission.
● One device has two functions
Support mobile station and base station free switch, no need to replace the hardware, cost-effective;
● Cloud + local solution
Support access to Qianxun cloud solution, also support local solution, provide local solution service support;
Technical Parameter
Performance indicators | |||
Signal frequency | GPS | L1CA/L1C,L2C,L2P | |
GLONASS | G1,G2 | ||
BDS | B1I,B2I | ||
BDS-3 | B1I/B1C,B2I,B2B | ||
GALILEO | E1,E5b/E5a | ||
QZSS | L1CA/L1C,L2C | ||
Accuracy of measurement | Carrier phase | 1 mm or less (RMS) | |
pseudorange | 0.12 m or less (RMS) | ||
Difference on A precision | The level of | + / - 2.5 mm (RMS) | |
elevation | + / - 5 mm (RMS) | ||
Communication indicators | |||
Communication port | RS485 | Communication rate 9600 | |
RS232 | Communication rate 115200 | ||
RJ45 | One 100M network port | ||
4G | Support full netcom 2G/3G/4G | ||
LORA | Supports LOLA in 433 band | ||
Host power specifications | |||
The power supply voltage | Wide voltage supply (9V to 36V) DC | ||
Rated power | < 3.5 W. | ||
Saving electricity power | <2W | ||
Machine working environment | |||
Working temperature | - 40 ℃ ~ + 65 ℃ | ||
Storage temperature | - 45 ℃ ~ + 80 ℃ | ||
humidity | 100% no condensation | ||
Impact resistant | Impact: IE68-2-27, resist 1 m drop | ||
Physical specifications | |||
The host weight | 1.25 kg | ||
Antenna weight | 425g | ||
The host material | aluminum | ||
Main engine dimensions | 174 mm * 130 mm * 65 mm | ||
Antenna dimensions | 150 mm x 63.7 mm | ||
Antenna connector mode | TNC-K | ||
Product Size
POWER indicator: POWER status indicator, flashing when the equipment is running normally; When no fixed position is set as a reference value, it is steady on; As a mobile station, no base position is set, steady on; 4G light: mobile network status light, link platform indicator light, flashing when the device is connected to the platform, not connected to the platform is steady on; TCPCS: local network signal light, when the local network connection, steady on, otherwise off; | ANT1 lamp: the status lamp of the first antenna, directional indicator light, steady on; ANT2 lamp: the status lamp and location indicator of the second antenna will blink when the Beidou module is working normally. DIFF lamp: state lamp of difference data indicator, flash once when the reference station sends difference data, flash once when the mobile station receives difference data; |
Antenna interface: connect the measuring antenna to obtain positioning data;
RS232 interface: set terminal parameters through instructions, local real-time solution output, program upgrade, etc.
Power interface: 9V-36V wide voltage input (recommended to use standard 12V power supply);
SIM card: fully Netcom mobile SIM card can be inserted;
LORA port: Connects to the LORA antenna.
4G interface: access to 4G antenna;
Ethernet interface: Transmits data to a specified server domain name or IP address over the Internet.