-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Inductive conductivity sensor
Low power consumptionLow maintenance costAnti interference design
Based on the conductivity of electrodeless inductive measurement, a generator is used to generate an alternating magnetic field in the primary coil, and an induced current is generated in the medium. The strength of the induced current depends on the conductivity, that is, the ion concentration in the medium. The induced current generates another magnetic field in the secondary coil. The receiver measures the induced current on the coil, thereby determining the conductivity of the medium. At the same time, the built-in temperature sensor can automatically compensate the temperature, which is suitable for online long-term monitoring environment.
Sample Now
Product Features
| Categories of models | ||||
| The specific models | Network | Referred to as" | Terminal type (interface) | Size |
| KRCFB-L | ||||
| Features: 1. Digital sensor, direct output OF RS-485 digital signal, MODBUS/RTU support 2. Built-in temperature sensor, automatic temperature compensation 3. No electrode, so no polarization reaction 4. Complete electrical isolation of measurement and medium, high precision measurement of heavy and easy to precipitate medium or solution, low maintenance cost 5. Low power consumption of sensor, anti-interference design of internal circuit Application scope: Marine, industrial wastewater, pharmaceutical, biotechnology, industrial manufacturing and other online monitoring of the whole process. | ||||
Technical Parameter
| The measured parameters | |
| Project | Within the capacity |
| The output signal | Support RS-485,MODBUS/RTU protocol |
| Method of measurement | Non-contact electromagnetic principle |
| Range | 0-200 mS/cm; The range is customized within 600mS/cm |
| Precision | Plus or minus 1.5% F.S. |
| The resolution of the | 0.1 mS/cm |
| The power supply | |
| Project | Within the capacity |
| The power supply | 12 or 24VDC±10%, 10mA; |
| Physical properties | |
| Project | Within the capacity |
| Size | Diameter of 30 mm; Length of 185.5 mm; |
| Protection grade | IP68; Water depth 20 meters; Other custom |
| The service life of the | Sensor 3 years or above |
| The length of the cable | 5 meters (default), customizable |
| Sensor housing material | PVC; PEEK; Can be customized |
| Other parameters | |
| Project | Within the let |
| The working conditions | 0 ~ 65 ℃; < 0.6 Mpa; High temperature conductivity customization |
| Calibration mode | Two calibration |
| The response time | 10 seconds T90 |
| Temperature compensation | Automatic temperature compensation (PT1000) |
Product Size
Product Size drawing (unit: mm)
Selection Guide
| Product model | |||||
| Spectrum | 26GHz | ||||
| The theory of bandwidth | |||||
| Transmission power | |||||
| Reception sensitivity | 1s |