-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Self-cleaning COD sensor
Ultraviolet absorption method was usedSmall sizeIntegrated internal selfcleaning
The new UV254 COD sensor launched by our company adopts the ultraviolet absorption method and brings together many years of application development experience in the industry. Ultraviolet UV LED cold light source, long luminous measurement life, and 550nm compensation light source, which effectively eliminates the influence of turbidity and chromaticity on sensor measurement, and has higher reliability.
Sample Now
Product Features
Categories of models | ||||
The specific models | Network | Referred to as" | Terminal type (interface) | Size |
KRCFB-L | ||||
Features: 1. Digital sensor, direct output OF RS-485 digital signal, MODBUS/RTU support 2. Double optical path measurement; 254nm and 550nm compensate the light source to eliminate turbidity and chromaticity effects 3. Imported UV254 LED cold light source, long life, small drift; Filter design, low interference, stable 4. COD, TOC, turbidity and temperature can be measured without chemical reagents and sample digestion 5. Compact size, internal integrated automatic cleaning brush, effectively prevent biological attachment; 6. The surface is treated with anti-corrosion passivation 7. Low power consumption of sensor, anti-interference design of internal circuit. | ||||
Technical Parameter
Project | Within the capacity |
The output signal | Support RS-485,MODBUS/RTU protocol |
Method of measurement | UV 254 dual wavelength UV absorption method |
COD range | 0.3-370mg /L equiv.khp |
COD precision | Plus or minus 5% f.s equiv. KHP |
COD resolution | 0.1mg/L or 0.01mg/L equiv.khp |
Turbidity range | 0 ~ 100 ntu |
Repetitive | Plus or minus 1% f.s equiv. KHP |
The power supply | |
Project | Within the capacity |
The power supply | 12 or 24VDC±10%, 15mA; 200mA when the brush is turning |
Physical properties | |
Project | Within the capacity |
Size | 48 mm diameter; Length is 186 mm; Optional protective cover |
Protection grade | IP68, water depth 10m |
The service life of the | Sensor 3 years or more, cleaning brush system 18 months or more |
The length of the cable | 5M (default), customizable |
Sensor housing material | Titanium alloy, 316L, quartz glass |
Other parameters | |
Project | Within the capacity |
The working conditions | 0.1 ~ 50℃, < 0.1mpa |
Calibration mode | Two calibration |
The response time | 10 seconds T90 |
Maintain and calibrate frequency | Sensor 3 months, cleaning brush 6 months |
Product Size
Product Size drawing (unit: mm)
Selection Guide
Product model | |
Spectrum | 26GHz |
The theory of bandwidth | |
Transmission power | |
Reception sensitivity | 1s |