-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Industrial PH transmitter
This product is suitable for industrial sewage, domestic sewage, agriculture, aquaculture and other scenarios in a non-corrosive weak acid and weak alkali environment.
Product Features
This product is a device for measuring the PH value of solution (hydrogen ion concentration index, pH value), with automatic temperature compensation function, automatic temperature compensation and manual temperature compensation can be switched at will.
This product is suitable for industrial sewage, domestic sewage, agriculture, aquaculture and other scenarios in a non-corrosive weak acid and weak alkali environment.
■ pH measurement range 0~14pH, resolution 0.01pH.
■ Temperature measurement range 0-80 ℃, resolution 0.1℃ (optional temperature compensation device).
■ With automatic temperature compensation function, manual compensation and automatic compensation can be switched at will.
■ RS485 communication interface: MODBUS RTU communication protocol can be easily connected to the computer for monitoring and communication.
■ You can set the ModBus communication address and change the baud rate.
■ the device can be supplied with wide voltage from 10 v to 30V dc.
■ The shell of the product is IP65 protection grade, which can be used in outdoor rain and snow environment.
Technical Parameter
The power supply | DC 10~30V |
Power consumption | 0.6 W. |
Communication interface | RS485; The standardMODBUS-RTUAgreement; Communication baud rate:2400,4800,9600Can be set |
pHMeasuring range | 0 ~ 14.00 pH;Dividing value:0.01 pH |
pHMeasurement error | Plus or minus0.15 pH |
Repeatability error | Plus or minus0.02 pH |
Temperature range | 0 ~ 80℃; Resolution:0.1° C (Set temperature for manual temperature compensation by default25℃) |
Temperature measurement error | Plus or minus0.5℃ |
Operating conditions of equipment | Ambient temperature:0-60℃ Relative humidity:< 85% |
Electrode temperature | 0 ~ 80℃ |
The electrode wire length | 5m,10m,15m,20mOptional (Default5m) |
Electrode life | 1years |