-
Smart Water
-
Smart Tank Farm
- DO Fluorescent Dissolved Oxygen Sensor
- ORP sensor
- pH sensor
- Ammonia nitrogen sensor
- Conductivity and pH two-in-one sensor
- Multiparameter sensor
- Self-cleaning turbidity sensor
- Inductive conductivity sensor
- Self-cleaning COD sensor
- Ultrasonic level meter
- Magnetostrictive level gauge
- Environmental water quality monitoring buoy
- Radar flowmeter
- Radar flowmeter
- Turbidity sensor
- Stainless steel rain gauge
- Radar water level gauge
- Residual chlorine sensor
- Electronic Water Scale (Type 485)
- Plate radar water level gauge
- Graphite conductivity sensor
- Bubble type water gauge
- Bubble gauge
- Salinity sensor
- Radar current meter
- Input level gauge
- Suspended solids (sludge concentration) sensor
- 24GHz radar water level gauge
-
Smart water conservancy
- Noise transmitter
- Beidou GNSS high precision receiver
- Pore water pressure gauge
- Air quality (PM2.5/PM10) transmitter
- Fluorescence dissolved oxygen transmitter
- Wind transmitter
- Industrial EC transmitters
- Wall mounted king shell temperature and humidity transmitter
- Industrial PH transmitter
- Wind speed transmitter
- On-line ammonia nitrogen sensor
- Electronic Water Scale (Type 485)
- On-line turbidity sensor
- Tip bucket rain gauge
-
Smart project products
LOADING IMAGES
Multiparameter sensor
Tear open outfit is convenientIntegrated design
Online multi-parameter self-cleaning digital sensor, integrated design, reliable and easy to use. Up to 7 parameters can be measured at the same time, and the sensor types can be selected from dissolved oxygen, pH, ORP, conductivity/salinity, ammonia nitrogen, turbidity, etc. The sensor can be freely selected and replaced, using RS-485 bus, Modbus/RTU communication protocol, Data can be transferred directly to the acquisition platform.
The online multi-parameter water quality sensor is equipped with an automatic cleaning device, which is smaller than the same industry. The cleaning time and frequency can be set by agreement to adapt to the water quality of different cleaning levels. The automatic cleaning device can effectively clean the sensor surface, prevent microorganisms from attaching, and greatly reduce maintenance costs. Each sensor is equipped with a quick-plug waterproof connector, which is easy to disassemble and assemble.
Front sensor guard
Sample Now
The online multi-parameter water quality sensor is equipped with an automatic cleaning device, which is smaller than the same industry. The cleaning time and frequency can be set by agreement to adapt to the water quality of different cleaning levels. The automatic cleaning device can effectively clean the sensor surface, prevent microorganisms from attaching, and greatly reduce maintenance costs. Each sensor is equipped with a quick-plug waterproof connector, which is easy to disassemble and assemble.
Front sensor guard
Product Features
| Categories of models | ||||
| The specific models | Network | Referred to as" | Terminal type (interface) | Size |
| KRCFB-L | ||||
| Features: L Integrated design, can integrate 7 monitoring parameters at the same time; L Digital sensor, RS-485 bus, Modbus/RTU protocol. L Equipped with automatic cleaning device. L Digital sensors such as dissolved oxygen, conductivity/salinity, turbidity, ammonia nitrogen, pH and ORP are optional, suitable for long-term online monitoring. Parameters can be combined freely | ||||
Technical Parameter
| The measured parameters | |
| Project | Within the capacity |
| Turbidity sensor | |
| Measuring range | 0-200NTU/0-1000NTU |
| Precision | < 3% F.S. |
| The resolution of the | 0.1 NTU |
| The measured parameters | |
| Project | Within the capacity |
| Conductivity/salinity sensor | |
| Measuring range | 0-2000 mu S/cm |
| 0-200mS/cm | |
| 0-70PSU | |
| Precision | Plus or minus 1.5% F.S. |
| The resolution of the | 0-2000 mu S/cm: 1 mu S/cm |
| 0-200 mS/cm: 0.1 mS/cm | |
| A scale of 0-70 to PSU: 0.1 PSU | |
| The measured parameters | |
| Project | Within the capacity |
| PH sensor | |
| Measuring range | 0-14pH |
| Precision | PH 0.1 mm |
| The resolution of the | 0.01 pH |
| The measured parameters | |
| Project | Within the capacity |
| ORP sensor | |
| Measuring range | - 1500 mv - + 1500 mv |
| Precision | Plus or minus 6 mv |
| The resolution of the | 1mV |
| The measured parameters | |
| Project | Within the capacity |
| Ammonia nitrogen sensor | |
| Measuring range | 0 to 10 mg/L or 0-100 mg/L |
| Precision | ±5 f.s. or ±3mg/L, whichever is greater |
| The resolution of the | 0.1 mg/L |
| The temperature | |
| Measuring range | 0-50℃ (subject to the temperature of each sensor) |
| Precision | Plus or minus 0.5 ℃ |
| The resolution of the | 0.1 ℃ |
| Multi-parameter sensor Provides other information | |
| Output way | RS-485(MODBUS/RTU0 |
| Clean way | Automatic cleaning |
| The power supply | 12 VDC plus or minus 5% |
| The length of the cable | Standard 5 meters, other lengths can be customized |
Product Size
Product Size drawing (unit: mm)
Selection Guide
| Product model | |||||
| Spectrum | 26GHz | ||||
| The theory of bandwidth | |||||
| Transmission power | |||||
| Reception sensitivity | 1s |